|
 |
|
Quick Facts - Metal Refinishing
|
|
|
|
| |
 |
|
Across North America, billions of dollars are lost
each year due to poorly maintained building exteriors. Original factory
finishes are affected by age and environmental stresses such as UV
radiation in sunlight, daily and seasonal temperature fluctuations, humidity,
salt spray abrasion, and airborne pollutants. These factors cause
the eventual failure of a building's protective finish. |
|
|
|
|
|
|
|
Even under normal conditions, protective finishes
such as anodized aluminum or those found on coil-coated steel will
show signs of surface degradation including colour fading, flaking,
pitting, chipping, chalking, and oxidation. If the surface failure
is not attended to in its early stages, it will progress unchecked
into the underlying substrate. Not only is this aesthetically undesirable,
such damage leads to the financial threat posed by the question of
replacement. |
|
|
|
|
|
|
|
Factory finishes gain their resilience from the fact
that they are applied under controlled conditions on a production line.
Conditions such as surface temperature, air movement, and dirt contamination
are under tight control. Induspray
uses a combination of detailed analysis, proper planning, and
specialized equipment to meet or exceed the performance of factory
coatings in the field. |
|
|
|
|
|
|
|
In the past, when a factory finish had worn to an unacceptable
level or when a colour change to the building was desired, the
replacement of a building's metal panels or extruded window and door
frames was the only option. With Induspray's development of high performance, in-field refinishing systems,
replacement is no longer necessary. |
|
|
|
|
|
|
|
Induspray's refinishing systems offer building owners an unbeatable value at
a fraction of the cost of replacement. |
|
|
|
|
|
|
|
Established in 1975, Induspray
is the largest contractor specializing in the development and
application of on-site refinishing systems for metal buildings. |
|
|
|
|
|
|
|
Recommended leading coating suppliers and steel
manufacturers, Induspray
refinishes anodized aluminum and coil-coated steel wall panels,
roofs, entrance door and window frames, porcelain finished metal
panels, galvanized steel panels, and awnings. Projects include high
and low rise commercial buildings, industrial buildings, retail shopping
centres, and condominium buildings. |
|
|
|
|
|
|
|
Induspray
has the knowledge and expertise to meet the challenges presented by field
application. Effective planning ensures that your refinishing
project will run smoothly and efficiently, with minimum disruption
or inconvenience to the occupants of your building. |
|
|
|
|
|
|
|
Induspray's refinishing systems have been thoroughly tested in the field
since 1975. Our procedures include extensive site pre-testing,
detailed surface preparation, careful monitoring of film thickness,
adhesion testing, and colour correctness checks. |
|
|
|
|
|
|
|
As innovative leaders in the field of refinishing, we
are continually developing new processes and testing new products to
serve you better. |
|
|
|
|
|
|
|
We use environmentally friendly techniques and
materials, where possible, without compromising the quality of our refinished
projects. |
|
|
|
|
|
|
|
At Induspray, we protect our client's interests. We choose the right refinishing
system for the building's surface, taking into account budgetary constraints,
environmental exposure, and desired life expectancy. |
|
|
|
|
|
|
 |
| |
|
|
|
